CAN 2½ ˝
USE LIMITS
Screened effluent with some abrasive substances
DIMENSIONS
A = 550 mm
B = 215 mm
C = 112 mm
D = 110 mm
E = Ø 2½ ˝ BSP female
OPERATION
Continuous - fully submerged pump. The pump is equipped with protective thermal breakers calibrated to 112°C with automatic reset.
CONSTRUCTION
Motor body:
Die-cast aluminium, anodized aluminium.Cover:
Die-cast aluminium, anodized aluminium.Pump body:
Cast iron EN GJL 200.Diffuser:
Bronze with special anti-abrasive nitrile-rubber protection.Impeller:
Open, bronze with special anti-abrasive nitrile-rubber protectionMotor:
Insulated dry chamber.Insulation:
Class F.Degree of protection:
IP 68.Bearings:
Long-life self-lubricated rolling.Mechanical seal on pump side:
TCT / TCT.Mechanical seal on motor side:
Carbon / ceramic.Cable:
10 meters Neoprene H07RN-F.Cable-lock:
Brass cable clamps.Single-phase version:
Built-in capacitor, automatic starting with float switch, direct starting without float switch.Discharge diameter:
2½ ˝ BSP femaleOther Products From Clayton Engineering
