FUP 2½ ˝

DIMENSIONS

A = 550 mm
B = 215 mm
C = 112 mm
D = 110 mm
E = Ø 2½ ˝ BSP female

OPERATION

Continuous - fully submerged pump.

CONSTRUCTION

Motor body:

Die-cast aluminium, anodized aluminium.

Cover:

Die-cast aluminium, anodized aluminium.

Pump body:

Cast iron EN GJL 200.

Diffuser:

Cast iron EN GJL 200.

Impeller:

Open, cast iron EN GJL 200

Motor:

Insulated dry chamber.

Insulation:

Class F.

Degree of protection:

IP 68.

Bearings:

Long-life self-lubricated rolling.

Mechanical seal on pump side:

Silicon carbide / silicon carbide.

Mechanical seal on motor side:

Carbon / alumina.

Cable:

10 meters Neoprene H07RN-F.

Cable-lock:

Brass cable clamps.

Single-phase version:

Built-in capacitor, automatic starting with float switch, direct starting without float switch.

Discharge diameter:

2½ ˝ BSP female

SPECIAL VERSIONS

FUP-BT:

a low-voltage 42 V AC (CEI 107-43).

Single-phase version:

waterproof box including capacitors and switch.

Cable:

Neoprene H07RN-F 5 metres.

COMPARE PRODUCT RANGE

FUP ½ ˝

TECHNICAL DATA

FUP 11 MS
FUP 11 T
FUP 12 T
FUP 13 T
FUP 14 T

SPECIAL VERSIONS

FUP BT 11 MS
FUP BT 11 T
FUP BT 12 T
FUP 13 T
FUP 14 T

COMPONENTS

FUP ½ ˝

INSTALLATION DIAGRAM

FUP ½ ˝